Torch ArmyTek Predator R5vers. 2012 Silver OP

NEW VERSION

2012 MODEL

Smooth Silver Version

Features:

Second-generation R5 Led

Lumens: up to 500
1 x 18650 battery 1.25 hours at maximum power
Throw distance: more than 200 meters
Adjustment of light by twist of the head
The last setting memory
Momentary On

PROVIDED BY:

Attachment clips the same coloration of the head

O ring replacement

Tab

Spare rubber button

COMPARATIVA VS R5 LED S2 by Fonarevka

INFORMATION FROM THE MANUFACTURER'S SITE:

Review by selfbuilt. Versione Italiana.
Review by light-reviews.com. Versione Italiana.
Review by mefistofele86. Versione Italiana.
Review by mefistofele86. Italian version.
Review by awl. Russian version.
Review by AVM. Russian version.
Review by Pikom. Polish version.
Review by mar3. Polish version.
Review by ichoderso. German version.
Review by gunga. Versione Italiana.

LED Cree XP-G (USA) is driven by 1.5 (R5 with 1 c tint)
-Uses 2nd generation of LED drivers
-3 types of current stabilization are selectable by user: full stabilization (FULL) semi-stabilization, simple as for the buck (SEMI) driver and stepped stabilization (STEP).
-The real long duration and the flat runtimes with FULL stabilization for one 18650 Li-ion battery at each mode against the standard buck drivers.
-The specially calculated long-range reflector intended for Cree XP-G LED (light beam with the angle of 5 degrees for the distances of 200 meters).
-The changeable quantity of modes and maximal tuning of them.
-The voltage supply selection, which allows using the batteries without protection board (PCB).
-Maximal mode without thermal runtime limits.
-The Firefly mode 0.1 lumens with runtime up to 100 days.
and etc.

The full features and manual you can download there: http://www.armytek.com/content/predator_manual.pdf

This flashlight is designed with the specially calculated long-rangereflector intended for Cree XP-G LED. End alignment of light beam angle of 5 degrees withthe kids as well as the faultless beam for the distancesup to 250 meters (820 feet). The spot diameter is 8 meters for 100meters of beam distance. The full spill is 24 degrees.

S-Tek ™, the next generation advanced electronics circuitry is based onthe ECO algorithms which decrease the system power consumption and makethis flashlight highly effective through the full battery usage.

The recent LED Cree XP-G (USA) is supplied by maximum current of 1.5 amp. The LED is not overheated and the luminous flux drop is minimalowing to the highly efficient heat removal and an advanced electroniccircuitry.

Adjustable quantity of modes with full tuning capabilities and continuously-variable selection.

The real-world high efficiency, long duration and flat runtimes withFULL stabilization for one 18650 Li-ion battery for each mode (standard buck incontrast to the circuitry).

The current stabilization diagrams are entirely changeable through theuser menu: full stabilization (FULL), simple semistabilization as forthe buck driver (seeds) and stepped stabilization (STEP).

The voltage supply selection allows using the batteries without protection board (PCB), for example: LiFePO4.

Maximal output mode without thermal runtime limits.

This flashlight is designed with the temperature sensor the LED inside to prevent overheating in extreme environments.

Availability of the Firefly mode 0.1 lumens with runtime up to 100 days (in contrast to standard 120 hours for low output mode).

The O-rings and threads are greased by Nyogel at.

Constant brightness without flicker effects.

Low voltage and high temperature indication.

Selectable automatic memorization of last chosen mode.

Resettable factory defaults (Military or Outdoor).

Advanced electronic protection from incorrect battery installation.

The flashlight is designed with the impact-resistant from bothsides bezels in order to protect it from falling and allow utilization duringcombat situations.

The bezels are made of solid stainless steel covered with specialgold-colored Titanium coating, which is 10 times harder than Type IIIhard anodization. There is also a flashlight modification with mattstainless steel bezels.

The built-in removable clip, convenient and durable.

Ergonomic design and reliable build quality for easy handling.

The rigid indestructible body, which does not roll and is protected fromimpacts and scratches. The body is developed for the lower weight withsufficient durability.

The metric threads for better water resistance made precisely for long life usage.

The flashlight has double silicone O-rings for each body thread andadditional O-rings for tailcap and L-shaped ring under the glass forimproved water resistance.

The flashlight possesses the ultra transparent hardened glass with anti-reflective coating, which is used in photo lenses.

The tough and easy-to-remove lanyard to avoid losing the flashlight and for comfortable access.

Protection from accidental switch-on (turn of the tailcap).

Advanced quality control.

The hard, scratch and impact-resistant matt coating with hardness HV400 anodizing.

Made of aircraft-grade aluminum-T6 T6061.

Water resistance to IPX-8 standard.

Uses 2xCR123A batteries or rechargeable Li-ion/1x18650 2xR123 Li-ion batteries or rechargeable 1xLiFePO4 batteries.

Approx. dimensions: 6.1 x 1.43 "D" (L x D 36.5 mm 155), body D 1 "(25.4 mm), weight: 4.23 oz (120 g)

Included accessories: holster, lanyard, O-rings, rubber button

For more information, please visit this products webpage.